i-Marine AIS Solutions

i-ais-BS1 is an AIS station designed for AIS management and monitoring functions to be performed with a shore installation.
It consists of an AIS Unit for standard AIS functions and a Communication Gateway to be able to communicate with an operation center over IP connectivity.

The i-ais-LCD10 eNav display delivers easy to use interface and rich set of navigation functions to mariners.

i-ais-TB CS is an advanced Class B “Carrier Sense” AIS Transponder which improves the safety of navigation by assisting in the efficient navigation of ships and small craft, protection of the environment and operation of Vessel Traffic Services (VTS).

i-ais-RX3 is an AIS Receiver device which basically receives AIS messages (including static, dynamic and voyage related data) from other AIS equipped devices (Vessels, AIS AtoNs, Base Station, etc.) within VHF coverage area, to enhance the safety of maritime navigation.

i-ais-TRK is a portable AIS Transponder which improves the safety of navigation by assisting in the efficient navigation of ships and small craft, protection of the environment.

i-ais-W, Warship AIS (WAIS) System is an Automatic Identification System enhanced for military requirements defined in related STANAG 4668 (Ed.2) and 4669 (Ed.2).

i-ais-STA, Secure AIS System, is an Automatic Identification System enhanced for military requirements defined in STANAG 4668 (Ed.2) and 4669 (Ed.2).

i-ais-SST Secure AIS Shore Station/Base Station, is an Automatic Identification System enhanced for military requirements defined in STANAG 4668 (Ed.2) and 4669 (Ed.2).

i-ais-WSS Warship AIS Shore Station/Base Station Class-A Type Shore Station enhanced with:

• Warship functionalities defined by STANAG 4668&4669
• Simultaneous activity of two separate secure channels parallel to two AIS channels
• Additional warship functionalities with advance user interface software and remote control
• Scenario Generation and Spoofing Capability.

Advanced software platform for command and control of whole AIS network including Secure and Warship AIS Stations.

• Spoofing capability
• Scenario generation
• Secure communication on multiple channels
• Track list
• Zone based rules
• Alarms (predefined and user defined)
• Geofencing
• CPA / TCPA calculation
• Various map types
• Bearing calculation
• Replay of ship movements
• Density Analysis
• Text messaging with ships
• Sensor fusion
• Integration with various sensors (AIS, Radar, Radio, Op.Con, MOS, DF, IR, CCTV, etc.)

Track hunderds of vessels online via various data sources with integrating to any other systems (like logistics).

• Leading Functions
• Multiple source of AIS source supported with color coding
• Satellite AIS data integration
• Speed, bearing and other relevant AIS information display
• Historical data and track information
• Multiple reports and export functionality
• Integration with external systems

Critical infrastructure and offshore management system is a remote monitoring & management package for offshore platforms. Enhanced protection and potential threats detection around the platform allows operators to protect asset from undesired events or accidents.

• AIS AtoN Station remote monitoring & management
• Tracking and identification of vessels
• Ship type classification
• Historic re-play of logged traffic
• Platform protection
• Surrounding traffic monitoring
• Platform protection zone
• Entry into protected zones and time to entry (CPA/ TCPA)
• Trigger local hardware (siren, alarm etc.)
• Allowed vessels list (entrance w/o alarm triggering)
• Traffic analysis

The system built on i-Sea platform is an efficient and easy-applicable package for displaying maritime data of a specific region. Being optimized for local marine traffic management, LTM stands between VTRS and VTS in terms of system scope. LTM provides basic sensor integration, core traffic management tools and data exchange interface in a cost-effective structure.

• Tracking and identification of vessels
• Ship type classification
• Historic re-play of logged traffic
• Automatic alarm generation and display
• Basic sensor integration (AIS – MOS – CCTV)
• Advanced reporting functions
• Zone operations (forbidden area, speed limit, anchoring etc.)
• Meteorological & Oceanographic Measurement (optional)

The Port Vessel Traffic Services (PTS) built on i-SEA™ Platform, provides a highly flexible and cost effective monitoring solution that supports multiple source tracking via add-on source-media modules such as SAT, SAT-AIS and GSM/GPRS.

• Tracking and identification of vessels
• Information Service: Broadcasting information such as waterway conditions, weather, hazards or accidents etc.
• Traffic Organization: Operational management of traffic, forward planning of vessel movements, sailing planning etc.
• Navigational Assistance: To support vessels under difficult navigational or meteorological circumstances
• Historic re-play of logged traffic
• Automatic alarm generation and display
• Sensor fusion (AIS – Radar – DF – CCTV etc.)
• Advanced reporting functions
• Zone operations (forbidden area, speed limit, anchoring etc.)
• Traffic analysis (optional)
• Training mode (optional)
• Meteorological & Oceanographic Measurement (optional)
• Thermal or Infra-red Camera Support (optional)
• Shore station remote monitoring (optional)

The fisheries management system built on top of i-SEA is an AIS enhanced Vessel Monitoring System that provides coastal AIS communication as well as the satellite connection for fisheries management and monitoring.

• Logbook function for catch data input and transfer over AIS / Satellite
• Catch type / amount / location data
• Landing logs, transferals, sales operations
• Catch control operations, date logs
• AIS support for vessel monitoring and logbook data transfer
• Patent pending technology for secure logbook transfer over AIS network
• Satellite AIS support for the regions out of coastal AIS coverage (optional)
• Satellite communication over dedicated modem (optional)

i-ais-AN1 is an AIS Aids to Navigation (AtoN) Station which basically broadcasts AIS Message 21 about the location and real-time status of
the AtoN on which it is physically or virtually located.

i-mrn-CGW Communication Gateway is a dual redundant connection interface module which provides remote monitoring and control functions for i-ais-AN1 AIS AtoN Station. It enables maritime authorities to handle monitoring and control functions of AIS AtoN Station through remote access. With the help of user- friendly “Monitoring & Management SW”, maritime authorities can monitor marine traffic and status of system or manage the operation of AIS AtoN stations, Lanterns, RACONs and Rotating Beacons, Meteorological and Oceanographic Sensors, etc.